Hi @bcSteve and welcome to the forum. You are probably best to post this in the actual (official) wi-fi issues thread, not as a new thread. Perhaps @plamen can move it there for you. Have you checked if your router is in the list there?
Also I know you have said you have tried all the work arounds so you are likely going to have to wait for the fix. See the existing threads on this. LineageOS are currently working on it and it will get passed to iodéOS once they figure it out…
The official BraX3 one:
Hi Community,
This post is made to track the issues reported with WiFi (WPA2 protocol).
Both Brax Technologies and iode team will be posting updates on the progress in this page.
If you are facing issues with WiFi Connectivity on your BraX3 running iodeOS, you have one of the following options:
Wait for a fix of iodeOS for the BraX3 to resolve the issue. No ETA available yet.
Use a router that the device has been tested with and is working: iodeOS wifi connection issues
Try to change the pr…
Also these may be of interest if you gavent looked at them previously - unfortunately many of them do duplicate some info, but hopefully you will find things to check or try thatbyou haven’t yet; and/or identify for sure if your router is one of the ones affected that the phone and it won’t play nicely together…
Can’t access my home wifi with my new Brax! Any help?
It works out of town, but not at my home or clients,so strange! Edit: we’re at a hotel, so I don’t know the Wi-Fi protocols here at the hotel, nor my client’s.
I recieved two new Brax phones recently and tried to set them up. I am unable to connect to the wifi. I understand the wifi connection has been a problem for many people. I have tried restarting the router and the phone multiple times. I continue to get the message - " Could not connect to Wi-Fi network." I have a NETGEAR44 router. I don’t see that on the list in the BRAX Community page, but there are several other NETGEAR versions listed that have red dots so I’m assuming the NETGEAR rout…
I have ATT U-verse here at my house. I have two Brax3 phones, and they both recognize the wi-fi, but when the password is entered, neither of them will connect. It says to check the password and try again. I have several other devices connected, so I know the password.
Is there a certificate that I need to find and download? A setting that is not correct?
Thank you for any help from the community.
Steven
Router is ASUS RT-AX57
Dual Band Wi-Fi Router, Brax3 on 6.6 iode build, security is WPA3-Personal, Frequency 5 GHz. When I first turned on the phone, I connected to my WiFi, even though the phone stated that it was connected to my router, it can’t provide internet. So, I tested that and I was able to download the 6.6 update and install it. Then I went to the browser and did a search for brax.me and went to the site, all with only the WiFi connected. It seems like there’s a bug with the phone’s …
Thank you, these are the settings I have.
I have noticed that wi-fi calling works when there is both cell service and wi-fi service. However, when I use the phone with only internet (no cell connection available, but cell service is on), it doesn’t make calls.
I will keep studying this. The need for wi-fi calling for me is when cell service is not available, so I’m not finished yet, but progressing to understand the cause.
It increasingly sounds like a system (OS, etc.) issue as I can get wi…
2 Likes